By the Authority Vested By Part 5 of the United States Code § (a) and. Part 1 of the Code of Regulations § 51 the attached document has been duly. Find the most up-to-date version of SAE J at Engineering SAE Technical Standards Board Rules provide that: “This report is published . SAE J—Automobile, Truck, Truck-Tractor, Trailer, And Motor Coach Wiring.
|Published (Last):||10 October 2013|
|PDF File Size:||19.97 Mb|
|ePub File Size:||13.55 Mb|
|Price:||Free* [*Free Regsitration Required]|
Clips for retaining cables and har- nesses shall be securely attached to body or frame member and cable or harness. It covers the areas sae j1292 performance, operating integrity, efficiency, economy, uniformity, facility of manufacturing and service.
All conductors are to be constructed in accordance with SAE Jl and J except when good engineering practice dictates special strand con- structions. The proposed FMVSS would also require each vehicle, as manufactured and sold, to have its device set to a speed not greater than a specified speed and to be equipped with means of reading the vehicle’s current speed setting and the two previous speed settings including the time and date the settings were changed through its On-Board Sae j1292 connection.
The statutory changes went sae j1292 effect on October 1,retroactively, and sae j1292 that FMCSA make conforming changes to its regulations to ensure they are current and sae j1292 with the statutory requirements.
We expect that, as a result of this joint rulemaking, virtually all of these vehicles would be limited to that speed. Sae j1292 or concentric will suffice in most applications, except those requiring higher flex life. Unless otherwise indicated, the latest version of SAE publications shall apply.
All States must allow 20, per axle and 34, lbs.
Ground Vehicle Standards No. SAE J Version – Download Manu
NOTE— Contact of the trailer king pin or apron plate with the lower coupler or grounding through the coupler sae j1292 not to be considered as providing a sae j1292 ground. The number of States that allow higher axle loads on Interstate and non-Interstate highways apply to combination vehicles as well. The splice must be insulated. Where impractical, the coding is to be followed to a junction block or harness ter- minating point where visual inspection will identify the circuit coding change.
Double trailer combinations consisting of a sae j1292, a semitrailer, and a trailer are sae j1292 common. Code Rulemaking What Cites Me. Left rear stop and turn Yellow. Also available protection for the core. The reference to SAE J shall not be construed to require circuit protection on trailers.
The rule is effective July 22, J11292 common LCVs are in operation across the U. Avoid areas sse excessive heat, vibration, arid. NOTE— Overlay or option wiring should be routed in the same fasteners with standard wiring where practical, or should be sae j1292 to the standard wiring with plastic straps or other mechanical means. Circuit Termination— Wiring for trailer circuits shall terminate in: Circuits using resistance wire shall be carefully placed in the sae j1292 so that their temperature rise will not create a hazard to, or malfunction of, any part of the vehicle.
Additional Documents type regulations. Structure of the trailer, and sae j1292. These vehicles are j1922 in all States, but the weight allowed depends on axle limits and axle spacing.
49 CFR 393.28 – Wiring systems.
Many States provide exemptions for public vehicles like fire trucks, snow plows, and others. This is written principally for new vehicles but is also applicable to rewiring and service. Whatever coding system is chosen, the system shall facilitate in harness manufac- turing and in service. It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. Spe- cial applications without irisulation grips sae j1292 be employed where other means of retieving-strairi are provided;- 3.
A general design guide would be that the sae j1292 will be required to dissipate no more than 5 W per insulated conductor foot. NHTSA and FMCSA have received requests to sae j1292 the comment period for their proposal that would require vehicles with a gross vehicle weight rating of more than 11, More limitations on accuracy are described at the GPO site.
sae j1292 Mitigate liability and better understand compliance regulations Boost efficiency: Except as noted, the wiring system shall conform to the guidelines of Section 3. Summary This notice makes corrections to a final rule published in the Federal Register on July 22,regarding amendments to the Dae Motor Carrier Safety Regulations in response to sae j1292 petitions for rulemaking and NTSB recommendations.
Jj1292 reference to SAE J shall not be construed to saw circuit protection on trailers. Secondary applications sae j1292 dictate the use sae j1292 special terminations for special use or application. Sae j1292 ser- rated paint cutting terminal may be utilized to make proper contact on painted surfaces.
Items that dictate sse design are: Consideration is given to physical and environmental factors such as flex- ing, heat, cold, bend, oil and fuel contact, dielectric, abrasion, short circuit, and pinch resistance among others. The Agency is making minor changes to correct errors and omissions, ensure conformity with Office of the Federal Register style guidelines, update cross references, restore an inadvertent deletion of the reference to an Underwriters Laboratories’ standard, and improve clarity and consistency of certain regulatory provisions.
This rule does not make any substantive changes to the affected regulations, except to remove one obsolete provision.